Regular cleaning of the board will ensure that dry erase ink does not sit on it for too long which can lead to stains. Use rubbing alcohol to clean old marks from a dry erase board. Wet a sponge and rub it on the stain. Wipe the area with a dry cloth. You can also use a dry erase marker of a darker color to erase the old marks if you don’t have any rubbing alcohol. Read More About School Noticeboards
A whiteboard cleaner is a good choice for removing stubborn stains. Whiteboard cleaners can be used to remove stains and condition the whiteboard. Make your own whiteboard cleaner by mixing 50% water with 50% isopropyl alcohol. You can add water to the cloth if wiping the stain off with a cloth does not work.
Bengay uses elbow grease and muscle to do the job. After you’re done, your arm will be sore.
Simply put, alcohol damages the lubricating layer on your dry erase board. Your whiteboard may look spotless but it will become less able to wipe clean over time.
What Business Owners Love About White
One of our researchers validated this answer for accuracy and completeness. A little propyl alcohol can remove stubborn stains.
How to Clean a Dry Erase Board
Micro scratches are the number one enemy to whiteboards. You should not use the green scrub pad you have in your hand to scratch that board. The board should never be touched by anything abrasive. This includes old, dirty erasers which can become as hard as bricks. The ink has become embedded in the scratches, which is why the dry erase marker will not come off the board. Use alcohol to clean the board. Next, use WD-40 occasionally.
You’ll most likely have to replace WD-40 every so often or if someone has damaged the finish. Although it is not enough to make the board unusable it should be noted. Toothpaste can remove stubborn stains from almost any smooth surface. Magic Erasers are not meant to be used in your mouth. They will disintegrate and become a mess. A Magic Eraser can remove plaque and stains from teeth. However, it is possible to remove tooth enamel, which protects teeth against bacteria. Apply toothpaste to the areas that are affected. Students can write on the whiteboard at our student desk.
Whiteboard-coated walls are ideal for so many purposes.
I’ve tried all of the online suggestions. While the whiteboards here will work fine for three days, ghosting can quickly occur and make it a mess. I have tried both WD-40 (Turtle Wax) and Rain-X (Car Wax), as suggested by different sites.
Alcohol, hydrogen peroxide, or whiteboard cleaner have so far not worked. Use a dry erase marker to erase as much as possible. You can erase any marks from the board with a dry eraser. Use a clean rag to wipe the WD-40 off the surface. After cleaning, dry the entire surface with a paper towel. The oil should be a little tacky on the board, but not visible or clumping anywhere. It is impossible to restore a whiteboard using conventional methods. A new whiteboard is best if the board is small and affordable. A high percentage of isopropyl alcohol will typically do the trick, but there are many other cleaners that can be used. For more information, see How to Erase Old Marks from a Dry Erase Board. It is easiest to trace over the permanent marker using a dry-erase marker, then erase them both. This method can be used to clean up certain marks. Make sure that they are fully covered in ink before you erase them.